UMTS - Types of congestion

UMTS cells can have below congestion types:

1. CE (Channel Elements) Congestion:  This happens when resources on the hardware are fully utilized. One solution is to add extra cards/boards in the Node B to increase capacity. For example, ZTE has BPK1 and BPKd cards that comprises of 384 and 768 CE respectively. CE congestion is always monitored by observing UL CE (since UL CE consumption is always greater than that in the DL)
2. Code Congestion:  High number of users could result in code congestion. Parameters such as minHSDPA users can be decreased to make room for cell DCH users. Carrier expansion can be done to accommodate larger  number of users.
3. TCP Congestion:  This represents that Total Carrier Power limit has been reached. Addition of Power Amplifier, new nodes/sites, decreasing CPICH power, or increasing cell transmission power are some of the remedial steps for rectification. 
4. Iub Congestion:  Congestion results due to fully utilized transmission media which can be increased to resolve the issue. 

UMTS - Analysis for Second Carrier Expansion

Second Carrier expansion can be proposed if there is low user throughput due to high number of users. One way of finding Node B/Cells that requires such an expansion is presented below. Extract the cell hourly level performance statistics of last 10 days and check for below criteria:

• RoT (Rise Over Thermal) >= 6dB and Cell DCH users >= 16
• HS User Throughout is less than 500 kbps and Average HSDPA users are larger than 16
• Non HSDPA TCP Utilization avg >=55% or max>=90%  and Cell DCH users >=16 

If these conditions are fulfilled by cells in at least 10 hours, the cell should be recommended for second carrier expansion. 

Note that second carrier expansion will not increase the peak user throughput, but the average user throughput is enhanced and so is the user QoS. The peak throughput is 21 Mbps for UMTS, however with Dual Carrier technology, the theoretical throughput limit is increased to as high as 42 Mbps.